Subnautica 2: Find tadpole fragments and build a vehicle

(Image source: Image source: Screenshot and editing GIGA)

In order to move around safer and, above all, faster underwater, you need a vehicle. You can find out where you can find all the tadpole fragments and what upgrades are available for them in this guide to Subnautica 2.

Locations of the tadpole fragments

The Tadpole is the first vehicle you can build in Subnautica 2. Before you can get started, you must first follow a few steps. The first of these is, to find three tadpole fragments. Only then can the vehicle actually be built.

The good news: All three fragments are not very far from the escape capsule and can be scanned one after the other. All you need is one Scanner.

All of the fragments are located on the edge of a huge gorge. Don’t worry: you don’t have to dive too deep to find the parts. The respective distance information is used The starting point is always the rescue capsule.

First tadpole fragment

The first fragment is in the ravine near a ledge.
The first fragment is in the ravine near a ledge. (Image source: Image source: Screenshot and editing GIGA)

The first fragment is located 145 meters to the south (about 190 degrees) at a depth of 90 meters. Wreckage and other debris lie around a rocky outcropping. We have marked the vehicle fragment in the picture.

Second tadpole fragment

The second fragment can be found on a shelf in a colonist bunker.
The second fragment can be found on a shelf in a colonist bunker. (Image source: Image source: Screenshot and editing GIGA)

The second fragment is located 251 meters to the southwest (about 120 degrees) at a depth of 87 meters. Here you look for a colonist bunker, the hatch of which leads into a rock wall. The tadpole fragment is on a shelf.

Third tadpole fragment

The third fragment is on the ground next to a giant clam.
The third fragment is on the ground next to a giant clam. (Image source: Image source: Screenshot and editing GIGA)

The third fragment is located 364 meters to the south (about 190 degrees) at a depth of 127 meters. The fragment lies on the sandy ground to the west of the giant clam. You don’t have to go to the shell directly.

All steps necessary to produce the vehicle

Anyone who thinks that most of the work has now been done is wrong. You can’t simply create the vehicle with a construction tool. First you need a base and in the base a large room in which you can Diving dock builds. Finally, the vehicle fabricator must be attached to the diving dock. The Vehicle manufacturer costs to produce

  • 2x titanium bars (6x titanium),
  • 1x copper bar (3x copper),
  • 2x glass (4x quartz).
The vehicle fabricator requires more space than it seems.
The vehicle fabricator requires more space than it seems. (Image source: Image source: Screenshot and editing GIGA)

Gives him more space than necessary. When a vehicle is manufactured, it is projected into the water of the diving dock and could suffer immediate damage if the tank is too small. After that you can the vehicle Make it yourself, for which you have to use the following materials:

  • 2x titanium bars (6x titanium)
  • 1x glass (2x quartz)
  • 1x system chip (1x cable set, 2x quartz)
  • 1x Energy Cell (2x Simple Battery, 1x Strong Acid, 1x Salt)

You have now completed everything necessary to build the tadpole. However, we strongly recommend that you also have one Tadpole dock to build. The tadpole needs electricity to function properly.

The ultimate time travel for gamers: This quiz catapults you straight back to the 90s

(Image source: Nintendo)

Question 1 of 14

Who is the protagonist of the Metroid game series?

A) Lara Croft

B) Samus Aran

C) Aya Brea

D) Terra Branford

You can dock the vehicle on the tadpole dock, which automatically charges the energy cell. However, keep in mind that this process 10 energy takes advantage of.